Search

   (716) 893-6510

  sales@buffalohydraulic.com

75+ Years of Experience

No products in the wishlist.

Menu
Search

BVA Hydraulics Products

Return to Previous Page
Filters
Grid
List
Show
Per page
,

BVA Hydraulics, Multi-Port, 10,000 PSI Manifolds

BVA Hydraulics, Multi-Port, 10,000 PSI Manifolds 10,000 psi maximum pressure. Modular design offered in increments of (2). Integrated, manually operated metering valves to isolate flow...
,

BVA Hydraulics, HDC10003, 100T Capacity, Through Hole Cylinder

BVA Hydraulics HDC Series of double-acting, through-hole cylinders are offered in (10) standard models ranging from 30 - 150 tons capacity.

This system was supplied for use in tension testing the epoxy bond to bridge anchors with a required pass/fail value of 155,000 lbs. force.

All BVA Hydraulics cylinders are designed, manufactured, and tested in compliance with ISO 9001 and ASME B30.1 standards and are covered by the BVA Limited Lifetime Warranty.

Buffalo Hydraulic has been selling and servicing high-pressure, high-tonnage hydraulic components and systems for over 80 years and serves as a proud partner to BVA Hydraulics as a Factory Authorized Distributor as well as a Factory Authorized Warranty/Service Center.

,

BVA Hydraulics PE50S3L15A, 10,000 PSI, Electric-Hydraulic Pump

For over 80 years, Buffalo Hydraulic has been selling high-pressure, high-tonnage hydraulic equipment.  Throughout these past eight decades, we've always offered service on all products, components, and systems sold.

Buffalo Hydraulic is a Factory Authorized Warranty/Service Center for all BVA Hydraulics products and we're proud to offer our support to you.  Whether you require technical support, general repairs on any BVA Hydraulics product that has been in service for many years, are needing a repair evaluation, or in the unlikely event you're experiencing a problem on a newer component, we're glad to help!

BVA Hydraulics Limited Lifetime Warranty

BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA Hydraulics product that does not conform to specification will be repaired or credited (at BVA's option) at BVA's expense for the life of the product.   This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries, and other parts or materials sold with or as part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer's warranty and not the BVA Limited Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.
,

BVA Hydraulics H1002, Low Profile, 10T, Hydraulic Jacking Cylinders

BVA Hydraulics, H-Series of high-pressure, high-tonnage hydraulic cylinders are offered through (42) standard models, ranging from 2 - 100 tons capacity. All BVA Hydraulics products adhere to ISO9001 Quality Assurance Standards and all BVA Hydraulics cylinders are designed, manufactured, and tested to meet or exceed ASME B30.1 standards and are covered by BVA Hydraulics Limited Lifetime Warranty.
,

BVA Hydraulics HLNF16002, Lock-Nut, Low Profile, Jacking Cylinders

BVA Hydraulics HULNF Series of low profile, lock nut jacking cylinders are offered through (5) standard models ranging from 60-250 tons capacity.  Incorporating this jacking cylinder design into your project allows unique load support through the mating lock nut and plunger.  Simply, as the plunger begins to rise, scheduled time-outs will allow for the mating lock nut to be screwed down against the cylinder body - Creating a mechanical load-holding support at that particular point. Combined, this system provided the required 745 tons of lifting force to lift and support a bridge for bearing replacement. All BVA Hydraulic cylinders meet or exceed ASME B30.1 requirements and are covered by the BVA Limited Lifetime Warranty.
,

BVA Hydraulics, HULN15008, 150 Tons Capacity, Lightweight Aluminum, Lock-Nut Hydraulic Jacking Cylinders

BVA Hydraulics HULN Series of lightweight aluminum, lock nut jacking cylinders are offered through (20) standard models ranging from 30 - 150 tons capacity.  Incorporating this jacking cylinder design into your project allows unique load support through the mating lock nut and plunger.  Simply, as the plunger begins to rise, scheduled time-outs will allow for the mating lock nut to be screwed down against the cylinder body - Creating a mechanical load-holding support at that particular point. The system as shown includes a PG70M3N05 gas engine two-stage hydraulic pump equipped with a 5.5 Hp Honda gas engine, 4-port custom manifold, (4) glycerin filled, NIST Certified pressure gauges, and (4) HULN15008 jacking cylinders equipped with manually operated, load holding valves. Combined, this system provided the required 466 tons of lifting force to precisely lift an overpass bridge for emergency repairs. All BVA Hydraulic cylinders meet or exceed ASME B30.1 requirements and are covered by the BVA Limited Lifetime Warranty.

Showing 85–90 of 199 results

buffalo-hydraulic-white

The passion and drive for our company along with the customers we serve originated in 1948 when Leo Phillips began selling & servicing hydraulic equipment.  Launched with a focus on supporting the local Western New York industry, Buffalo Hydraulic was founded.

Buffalo, NY 14211
Email: sales@buffalohydraulic.com
Phone: (716) 893-6510

USEFUL LINKS

RECENT PRODUCTS

SPX Power Team, PE184 Vanguard Jr. Series, Electric-Hydraulic Pump

Buffalo Hydraulic proudly serves as a Platinum Distributor as well as a Factory Authorized Warranty Service Center for SPX Power Team - Hydraulic Technologies hydraulic products.

“Power Team” is a registered trademark of the SPX FLOW Hydraulic Technologies division of SPX FLOW Inc. (“SPX FLOW”). All Power Team products and parts, with the exceptions noted below, are warranted against defects in materials and workmanship for the life of the product or part. (The life of the product or part is defined as that point in time when it no longer safely or properly functions due to normal wear). Chains, batteries, electric motors, gas engines, knives and cutter blades which are sold with Power Team products are not covered by this warranty and instead are warranted as follows: • Electronics are warranted against defects in materials and workmanship for a period of one year from date of purchase. • Consumable parts or accessories, including without limitation, chains, batteries, knives and cutter blades are warranted against defects in materials and workmanship for a period of one year from date of purchase. • All electric motors and gas engines are separately warranted by their respective manufacturer under the terms and conditions stated in their separate warranty. The foregoing warranties do not cover ordinary wear and tear or any product or part that has been worn out, abused, heated, ground or otherwise altered, used for a purpose other than that for which it was intended or used in a manner inconsistent with any instructions regarding its use. To qualify for warranty consideration, return the Power Team product, freight prepaid, to a Power Team authorized repair center or to the SPX FLOW factory. If any product or part manufactured by SPX FLOW found to be defective by SPX FLOW, in its sole judgment, SPX FLOW will, at its option, either repair or replace such defective product or part and return it via best ground transportation, freight prepaid. THIS REMEDY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE FOR ANY DEFECTS IN THE PRODUCTS OR PARTS MANUFACTURED AND SOLD BY SPX FLOW OR FOR DAMAGES RESULTING FROM ANY OTHER CAUSE WHATSOEVER, INCLUDING WITHOUT LIMITATION, SPX FLOW’S NEGLIGENCE. SPX FLOW SHALL NOT, IN ANY EVENT, BE LIABLE TO ANY BUYER FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND, WHETHER FOR DEFECTIVE OR NON-CONFORMING GOODS, NEGLIGENCE, ON THE BASIS OF STRICT LIABILITY OR FOR ANY OTHER REASON. SPX FLOW’s PowerThonTM Warranty is expressly limited to persons who purchase Power Team products or parts for the resale or for use in the ordinary course of the buyer’s business. THIS WARRANTY IS EXCLUSIVE, AND SPX FLOW MAKES NO OTHER WARRANTY OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCTS MANUFACTURED AND SOLD BY IT, WHETHER AS TO MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY OTHER MATTER. No agent, employee, or representative of SPX FLOW has any authority to bind SPX FLOW to any affirmation, representation, or warranty concerning Power Team products or parts, except as stated herein. The purpose of this exclusive remedy shall be to provide the buyer with repair or replacement of products or parts manufactured by SPX FLOW found to be defective in materials or workmanship or negligently manufactured. This exclusive remedy shall not be deemed to have failed of its essential purpose so long as SPX FLOW is willing and able to replace said defective products or parts in the prescribed manner. Any inconsistent terms contained in SPX FLOW’s Standard Terms and Conditions, or other SPX FLOW terms or warranty documents, shall not be interpreted to modify or limit this PowerThonTM Warranty. For the avoidance of doubt, this PowerThonTM Warranty is applicable only to Power Team products and does not apply to any other SPX FLOW products.

Buffalo Hydraulic Custom-Design, Double-Acting, Flange Mount Pressing Cylinders

Buffalo Hydraulic Custom-Design, Double-Acting, Flange Mount Pressing Cylinders 3,00 psi maximum pressure. Double-acting, flange-mount design. 84,823 lbs. (42.4T) each at 3,000 p.s.i. ø6.00″ Internal bore....
,

BVA Hydraulics HLNF20002 Low Profile, Lock-Nut Design 200T Jacking Cylinder

Buffalo Hydraulic proudly serves as a Factory Authorized Stocking Distributor as well as a Factory Authorized Warranty/Service Center for all BVA Hydraulics products. ASME B30.1 BVA Hydraulics hydraulic cylinders are designed, built, and tested to meet or exceed ASME B30.1 standards. ISO 9001 Quality Assurance BVA Hydraulics products are manufactured through an International Quality Assurance System, ISO 9001, involving consistent oversight of administration, management, manufacturing, and production control.  Under this system, the related operations are monitored on all aspects from the purchase order to the assembly line and through to shipping the order. BVA Limited Lifetime Warranty All BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.  Contact BVA or Buffalo Hydraulic for the disposition of this warranty. This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries, and other parts or materials sold with or part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.

© 2016 Buffalo Hydraulics. All Rights Reserved. Buffalo NY Web Design by Newbird

Terms and Conditions