BVA Hydraulics High Tonnage Hydraulic Jacking System
With differing global-operating voltages, standard and custom reservoirs, manual and solenoid operated directional valves, multi-port manifolds, and jacking cylinders ranging from 1 – 1,000 tons force, Buffalo Hydraulic has the resources and experience to design a jacking system to meet your most challenging lifting application.
All BVA Hydraulics products are manufactured in accordance with the strict management, manufacturing, and production control of ISO 9001.
Inquire about BVA Hydraulics High Tonnage Hydraulic Jacking System
BVA Hydraulics High Tonnage Hydraulic Jacking System
- 115 VAC, 1 Ph., 60 Hz., electric hydraulic jacking system.
- 3-way, 3-position, manually operated directional valve.
- Advance-Hold-Retract function.
- 10′ hand-held momentary motor control pendant.
- High flow, 2-speed design.
- 290 cu.” of oil flow per minute from 0-350 psi (1st stage).
- 18 cu.” of oil flow per minute from 350 – 10,000 psi (2nd stage).
- 10,000 psi maximum pressure.
- Internal pre-set pressure relief valve.
- 6 low-profile jacking points of lift.
- Single-acting, spring return jacking cylinders.
- 20 Tons of lifting force per jacking cylinder at 9,133 psi (120 tons combined).
Related Products
Buffalo Hydraulic – A 20 Point Jacking System Console
Beginning with manually operated screw jacks over 100 years ago, today’s high-pressure, hydraulic jacking systems & components provide safety, efficiency, and endless capabilities from a...
BVA Hydraulics High Tonnage Hydraulic Jacking Cylinders
All BVA Hydraulics cylinders are designed, manufactured, and tested to meet or exceed Industry Standard ASME B30.1.
BVA Hydraulics High Tonnage Hydraulic Jacking Cylinders
BVA Hydraulics HLN Series lock-nut design high tonnage, hydraulic jacking cylinders are offered in (30) standard models ranging from 50-300 tons capacity. All HLN cylinders include a mating-engineered lock nut to create mechanical load holding, an over-travel port, and nickel-plated plungers. BVA cylinders are designed, manufactured, and tested in accordance with Industry Standard ASME B30.1.
BVA Hydraulics High Tonnage Hydraulic Jacking Systems
BVA Hydraulics HC Series of hollow plunger cylinders provide tensioning, stressing, and pulling force ranging from 12-100 tons through (11) standard models. Buffalo Hydraulic serves as a Factory Authorized Stocking Distributor as well as a Factory Authorized Warranty Service Center for all BVA Hydraulics products. Whether your project requires a single-point circuit, or multiple tensioning points through 10,000 psi hollow plunger hydraulic cylinders, we're glad to offer our support.
BVA Hydraulics Custom-Design, High-Tonnage, Hydraulic Jacking System
Confidence Built on Quality ASME B30.1 ANSI B40.1 SAE 100 BVA Hydraulics products are manufactured through an International Quality Assurance System, ISO 9001 which involves consistent observation of administration, management, manufacturing, and production control. Under this system, the related operations are monitored in all aspects from the purchase order to the assembly line and through to shipping the order. The cylinders comply with load testing requirements and/or the safety factor for material yield strength while still functioning properly without oil leakage. BVA Hydraulics pressure gauges meet the criteria for grade A. BVA Hydraulics hydraulic hoses comply with the Material Handling Institute’s specification of minimum life cycles and minimum burst pressure rating. Products comply with the industry standards defined by ISO 9001
Reviews
There are no reviews yet.