Power Team 9644 Multi-Port Manifold
Inquire about Power Team 9644 Multi-Port Manifold
SPX Power Team Manifold Complete With Integrated Needle-Flow Control Valves.
- 10,000 p.s.i. Maximum operating pressure.
- Seven 3/8″ Female N.P.T. working ports.
- Four built-in needle valves for independent flow regulation.
Oil, much like electricity, will flow the path of least resistance. This condition is known as Pascal’s Law.
When forces differ across several points of a multi-point system, regulating flow can be accomplished easily and precisely using this style of manifold. Incorporating load holding, check valves at each cylinder will maintain any flow adjustments that have been made back at the manifold. Using a modular design, this manifold can be increased in increments of two circuits – to as many as is required.
Scheduling time-outs, evaluating the lifting points through accurate measurements, and making any necessary adjustments will ensure a safe and level lift is obtained.
Related Products
BVA Hydraulics, 10,000 PSI, Multi-Port Hydraulic Manifolds
Buffalo Hydraulic serves as a Factory Authorized Distributor as well as a Factory Authorized Warranty/Service Center for BVA Hydraulics products. This close working partnership will provide you with all the technical support that you require, before, during, and after your project has been completed!
Power Team, Custom 9642, 6-Port, Jacking-System Manifold Assembly
Power Team, Custom 9642, 6-Port, Jacking-System Manifold Assembly 10,000 psi Maximum pressure. Custom design is shown with one inlet port and 6-working ports. Manually operated,...
Power Team 10,000 PSI, Multi-Port Hydraulic Manifolds
Power Team 10,000 PSI, Multi-Port Hydraulic Manifolds 10,000 PSI Maximum operating pressure 9644 Shown, equipped with optional NIST Certified pressure gauges and quick disconnect couplers....
10,000 psi, 6-Port, High-Tonnage, Jacking System Manifold
With nearly 75 years of high-pressure, high-tonnage hydraulic experience, Buffalo Hydraulic will serve as a great partner in designing your jacking system. Countless high-pressure, hand-operated, air-hydraulic, electric-hydraulic, gas, and diesel engine-driven pumps and jacking cylinders ranging from 1 - 1,000 tons capacity, will allow us to help with your project in any way we can!
BVA Hydraulics, Custom 5-Port, High-Tonnage, Jacking System Manifold
BVA Hydraulics 10,000 psi multi-port manifolds are modular in design and can be provided in increments of two. From there and with reservoir volumes through 40 gallons, Buffalo Hydraulic has the experience to offer a high-tonnage hydraulic jacking system with as many jacking points as your project requires. With jacking cylinders ranging from 1 - 1,000 tons capacity, hose lengths up to 250', and an AutoCAD flow diagram, all systems are delivered, fully assembled, bled, pressure tested, and ready for immediate use!
BVA Limited Lifetime Warranty
All BVA Hydraulics products are warranted to be free of defects in materials and workmanship. Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product. Contact BVA or Buffalo Hydraulic for the disposition of this warranty.
This warranty does not cover ordinary wear and tear, abuse, misuse, alteration or use of improper fluids or maintenance as determined by BVA and its authorized service centers. All electric motors, gas engines, batteries and other parts or materials sold with or part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty. BVA shall not be liable for consequential or incidental damage or loss.
BVA Hydraulics, Multi-Port, 10,000 PSI Manifolds
BVA Hydraulics, Multi-Port, 10,000 PSI Manifolds 10,000 psi maximum pressure. Modular design offered in increments of (2). Integrated, manually operated metering valves to isolate flow...
Multi Port Manifold Assembly
Four, 10,000 psi, 6-port manifold assemblies were required to regulate flow to a structural steel lifting project. With custom orifices and finite manual control, the...
BVA Hydraulics Multi-Port, 10,000 PSI Hydraulic Manifold Assembly
BVA Hydraulics Multi-Port, 10,000 PSI Hydraulic Manifold Assembly Custom, 6-port, 10,000 psi hydraulic manifold assembly. Shown with (6) individual, manually operated, flow control valves and...
Reviews
There are no reviews yet.