BVA Hydraulics H1002, Low Profile, 10T, Hydraulic Jacking Cylinders
BVA Hydraulics, H-Series of high-pressure, high-tonnage hydraulic cylinders are offered through (42) standard models, ranging from 2 – 100 tons capacity.
All BVA Hydraulics products adhere to ISO9001 Quality Assurance Standards and all BVA Hydraulics cylinders are designed, manufactured, and tested to meet or exceed ASME B30.1 standards and are covered by BVA Hydraulics Limited Lifetime Warranty.
Inquire about BVA Hydraulics H1002, Low Profile, 10T, Hydraulic Jacking Cylinders
BVA Hydraulics H1002, Low Profile, 10T, Hydraulic Jacking Cylinders
- 10,000 psi Maximum pressure.
- Single-acting, spring return design for use in any position.
- 20,000 lbs./force (10T) each @8,929 psi.
- 4.84″ Retracted height.
- 2.01″ Stroke/travel.
- Shown, equipped with custom base support for added stability.
- Optional CVM3, manually operated, load-holding valve with relief valve are shown installed in the working port of each cylinder.
- Engineered 2 1/4″ 14, rod end collar thread for fixture mounting.
- 5/16″, 18 base mounting holes to accept base plate support.
- Industrial hard chrome plunger on all H-Series hydraulic cylinders.
- CH38F female half quick disconnect coupler standard on all models except H0500 (CRZ14F).
- 42 Standard models, ranging from 2 – 100 tons capacity make up the BVA Hydraulics H Series of hydraulic cylinders.
Related Products
BVA Hydraulics High Tonnage Hydraulic Jacking Systems
BVA Hydraulics HC Series of hollow plunger cylinders provide tensioning, stressing, and pulling force ranging from 12-100 tons through (11) standard models. Buffalo Hydraulic serves as a Factory Authorized Stocking Distributor as well as a Factory Authorized Warranty Service Center for all BVA Hydraulics products. Whether your project requires a single-point circuit, or multiple tensioning points through 10,000 psi hollow plunger hydraulic cylinders, we're glad to offer our support.
BVA Hydraulics High Tonnage Hydraulic Jacking Systems
BVA Hydraulics H Series single-acting, spring return jacking cylinders are offered in 42 standard models ranging from 2 - 100 tons capacity.
BVA Hydraulics Custom High Tonnage Hydraulic Jacking Systems
BVA Hydraulics Custom High Tonnage Hydraulic Jacking Systems 10,000 psi operating pressure. 115 VAC, 1 Ph., 60 Hz. High flow, 2-stage design. 475 cu.” of...
BVA Hydraulics High Tonnage Hydraulic Jacking System
BVA Hydraulics 10,000 PSI Hydraulic Pumps are available in an endless combination of hand hydraulic, air hydraulic, gas engine, diesel engine, and electric hydraulic design. Direct mount, directional control valves in manually operated, solenoid operated, and reservoir volumes from 1-40 gallons will ensure the design needed to complete your most demanding high-pressure hydraulic project.
BVA Hydraulics High Tonnage Hydraulic Jacking System
With differing global-operating voltages, standard and custom reservoirs, manual and solenoid operated directional valves, multi-port manifolds, and jacking cylinders ranging from 1 - 1,000 tons force, Buffalo Hydraulic has the resources and experience to design a jacking system to meet your most challenging lifting application. All BVA Hydraulics products are manufactured in accordance with the strict management, manufacturing, and production control of ISO 9001.
Reviews
There are no reviews yet.