Search

   (716) 893-6510

  [email protected]

75+ Years of Experience

No products in the wishlist.

Menu
Search

Return to Previous Page
Zoom images

Buffalo Hydraulic Telescopic Hydraulic Die Set Table

Spec Sheet
Inquire About This Product

Add to Wishlist
Category:
Description

Buffalo Hydraulic BHEHDC-SPL Electric Hydraulic Die Cart

  • 36.00″ wide.
  • 78.00″ double-acting telescopic travel.
  • Electric hydraulic operation.

A custom design to deliver the means for the installation and removal of 4,300 lbs. die sets from limited access stamping presses was needed.  With clearance in mind, a unique double-acting, telescopic hydraulic cylinder was recessed between the side frames of the cart.  High-capacity rollers were fitted to the top side rails and a custom-built electric hydraulic pump completed the slide table design.  Controlled and precise locating of the die sets was safe, repeatable, and now efficiently carried out.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Buffalo Hydraulic Telescopic Hydraulic Die Set Table”

Related Products

Buffalo Hydraulic 30,000 PSI Test Pump

Buffalo Hydraulic BHAHP-30000-SPL Custom Air Hydraulic Test Pump 30,000 psi Maximum output operating pressure. 120 psi input air pressure. Output system pressure is easily adjusted...

Buffalo Hydraulic Through Hole Lock Nut Cylinders

BHCSY60X4-24.00-SPL BVA Hydraulics PE50W4N05A Electric Hydraulic Pumps. 115 VAC, 1 Ph., 60 Hz. High capacity, 2-stage design. 3-Way, 3-Position manually operated directional valve. 10 Gallons...

Power Team Custom Hydraulic Presses – High Tonnage Systems

SPX Power Team High Pressure – High Tonnage Hydraulic Systems PE462S Electric Hydraulic Pump 115 VAC, 1 Ph., 60 Hz. 2 Stage, high flow design 2...

Buffalo Hydraulic Custom Hydraulic Powerunit

Buffalo Hydraulic BHEP3000-5-SV-SPL Custom Electric Hydraulic Powerunit 115 VAC, 1 Ph., 60 Hz. Solenoid-operated directional valve. Flow control on ‘A’ and ‘B’ ports. Pressure reducing...

SPX Power Team Custom Post Tensioning Systems

120 Tons Capacity Post Tensioning System PE241S SPX Power Team electric hydraulic pump. 115 VAC, 1 Ph., 60 Hz. 4-way, 3-position solenoid operated directional valve. Hand-held push...

Buffalo Hydraulic Custom Electric-Hydraulic C press

Buffalo Hydraulic Custom BHEHP-10000-6-SPL Electric-Hydraulic C-Press Electric/Hydraulic C-Press. 10,000 lbs. force 6.00″ stroke/travel. 10.00″ depth of throat. 10.00″ vertical opening. 115 VAC, 2-stage hydraulic pump....

SPX Power Team High Pressure Hydraulic System

SPX Power Team PE554 Electric Hydraulic Pump 115 VAC, 50/60 Hz., 1 Ph. Universal Motor. High flow, 2-Stage pump design. 56 cu.”/miunte @10,000 p.s.i. (Maximum...

Buffalo Hydraulic 20-Point, High-Tonnage Jacking Systems

Buffalo Hydraulic BHCSY20X20-CHS-SPL Custom high tonnage hydraulic jacking manifold assembly. Independent finite flow control to 20 hydraulic jacking cylinders. This custom-designed hydraulic console can be...

BVA Hydraulics – Buffalo Hydraulic High Tonnage Hydraulic Jacking Systems

BVA Hydraulics PEW1505T 10,000 psi  Electric-Hydraulic Pump 115 VAC, 60 Hz., 1 Ph., 1.5 Hp. Internal bypass relief valve – 10,000 p.s.i. (Maximum Pressure). 3...

Buffalo Hydraulic Custom Electric Hydraulic Powerunits

Buffalo Hydraulic BHEHP25X3000ACP-SPL Custom electric hydraulic power unit. 2,800 psi maximum operating pressure. 25 gpm. 50 Gallons reservoir. 460 VAC, 3 Ph., 60 Hz., 10...

buffalo-hydraulic-white

The passion and drive for our company along with the customers we serve originated in 1948 when Leo Phillips began selling & servicing hydraulic equipment.  Launched with a focus on supporting the local Western New York industry, Buffalo Hydraulic was founded.

Buffalo, NY 14211
Email: [email protected]
Phone: (716) 893-6510

USEFUL LINKS

RECENT PRODUCTS

,

BVA Hydraulics PU55M3N025B Universal Motor, Electric-Hydraulic Pump

Brand Loyalty Versus Quality Control

It's easy to fall back on the old standby, but when you are given the option of greater control over your orders from raw material sourcing to drop shipping directly to a job site, the choice is clear. Every step of the way, BVA Hydraulics provides personal care in everything from testing their product up to 10,000 cycles and giving flexibility of customization on orders. Choosing a high-pressure hydraulics supplier doesn't have to be complicated.  BVA Hydraulics offers as much value as possible to ensure safety and reliability through all of its products. As a Factory Authorized Distributor and Warranty/Service Center, and with nearly 80 years of high-pressure, high-tonnage hydraulic experience, Buffalo Hydraulic is proud to partner with BVA Hydraulics in this way to serve your needs.

ISO 9001 Quality Assurance

BVA Hydraulics products are manufactured through an International Quality Assurance System, ISO 9001 which involves consistent observation of administration, management, manufacturing, and production control.  Under this system, the related operations are monitored on all aspects from the purchase order to the assembly line and through to shipping the order.

BVA Limited Lifetime Warranty

All BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.  Contact BVA or Buffalo Hydraulic for the disposition of this warranty. This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries,s and other parts or materials sold with or as part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.
,

Buffalo Hydraulic Custom, 25 Tons Capacity C-Press

Buffalo Hydraulic has been selling high-pressure, high-tonnage hydraulic equipment for over 80 years.  During these past eight decades, we've always offered service on all products, components, and systems sold.

Buffalo Hydraulic is a Factory Authorized Warranty/Service Center for all BVA Hydraulics products and we're proud to offer our support to you.  Whether you require technical support, general repairs on any BVA product that has been in service for many years, need a repair evaluation, or in the unlikely event you're experiencing a problem on a newer product, we're glad to help!

BVA Hydraulics Limited Lifetime Warranty

BVA products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA's option) at BVA's expense for the life of the product.   This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries, and other parts or materials sold with or as part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer's warranty and not the BVA Limited Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.
,

BVA Hydraulics HDC6006, 60T Capacity, Through-Hole Cylinder

ASME B30.1

BVA Hydraulics hydraulic cylinders are designed, built and tested to meet or exceed ASME B30.1 standards.

ISO 9001 Quality Assurance

BVA Hydraulics products are manufactured through an International Quality Assurance System, ISO 9001 which involves consistent observation of administration, management, manufacturing, and production control.  Under this system, the related operations are monitored on all aspects from the purchase order to the assembly line and through to shipping the order.

BVA Limited Lifetime Warranty

Buffalo Hydraulic proudly serves as a Factory Authorized Stocking Distributor as well as a Factory Authorized Warranty/Service Center for all BVA Hydraulics products. All BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.  Contact BVA or Buffalo Hydraulic for the disposition of this warranty. This warranty does not cover ordinary wear and tear, abuse, misuse, alteration or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries and other parts or materials sold with or part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.

© 2016 Buffalo Hydraulics. All Rights Reserved. Buffalo NY Web Design by Newbird

Terms and Conditions