BVA Hydraulics HLNF16002, Lock-Nut, Low Profile, Jacking Cylinders
BVA Hydraulics HULNF Series of low profile, lock nut jacking cylinders are offered through (5) standard models ranging from 60-250 tons capacity. Incorporating this jacking cylinder design into your project allows unique load support through the mating lock nut and plunger. Simply, as the plunger begins to rise, scheduled time-outs will allow for the mating lock nut to be screwed down against the cylinder body – Creating a mechanical load-holding support at that particular point.
Combined, this system provided the required 745 tons of lifting force to lift and support a bridge for bearing replacement.
All BVA Hydraulic cylinders meet or exceed ASME B30.1 requirements and are covered by the BVA Limited Lifetime Warranty.
Inquire about BVA Hydraulics HLNF16002, Lock-Nut, Low Profile, Jacking Cylinders
BVA Hydraulics HLNF16002, Lock-Nut, Low Profile, Jacking Cylinders
- 10,000 psi maximum pressure.
- Single acting, load return, low profile, lock-nut design.
- Engineered mating lock nut creates mechanical load holding.
- 5˚ Tilt saddle is standard on all HLNF hydraulic jacking cylinders.
- 160 Tons capacity each @9,012 psi.
- 5.83″ Retracted height
- 1.77″ Stroke/travel.
- CH38F quick disconnect coupler included with all HLNF models.
- 91 Lbs. each
Related Products
BVA Hydraulics – HLN15002 High-Tonnage, Lock-Nut Cylinders
Is where your hydraulic components come from important to you?
In a time when leading competitors are increasingly outsourcing to China, BVA Hydraulics is proud to have the unique advantage of owning and operating their high-pressure hydraulics manufacturing plant in Taiwan since 1971 - Nearly 45 years now! Taiwanese manufacturing is known worldwide as being among the highest of modern quality, putting the country on the short list of TAA-compliant regions. BVA Hydraulics' ability to eliminate the middleman to source raw materials with supply chain stability sets them above other high-pressure hydraulics manufacturers. This, along with nearly 100,000 square feet of office, warehouse, testing facilities, and product showrooms in Kansas City Missouri provides a perfect combination!Brand Loyalty Versus Quality Control
It's easy to fall back on the old standby, but when you are given the option of greater control over your orders from raw material sourcing to drop shipping directly to a job site, the choice is clear. Every step of the way, BVA Hydraulics provides personal care in everything from testing their product up to 10,000 cycles and giving flexibility of customization on orders. Choosing a high-pressure hydraulics supplier doesn't have to be complicated. BVA Hydraulics offers as much value as possible to ensure safety and reliability through all of its products. As a Factory Authorized Distributor and Warranty/Service Center, and with nearly 80 years of high-pressure, high-tonnage hydraulic experience, Buffalo Hydraulic is proud to partner with BVA Hydraulics in this way to serve your needs.
BVA Hydraulics High-Tonnage Hydraulic Jacking Cylinders
BVA Hydraulics offers over 280 standard 10,000 psi hydraulic cylinders in lightweight aluminum, hollow plunger, single-acting - load return, single-acting - spring return, double-acting, pull, and load holding lock-nut cylinders with a range from 2 - 1,000 tons capacity. All BVA Hydraulics cylinders are designed, manufactured, and tested to meet or exceed industry standard ASMEB30.1.
Buffalo Hydraulic Custom Lock Nut Hydraulic Cylinders
Buffalo Hydraulic SALN60X24-SPL Hollow Plunger, Lock Nut Cylinders. 65 Tons force each @10,000 p.s.i. Single acting, through hole design. 37.25″ Retracted height. 24.00″ Stroke. Ø2.50″ Through...
BVA Hydraulics – High Tonnage Hydraulic Jacking Cylinders
BVA Hydraulics H Series single-acting, spring return hydraulic cylinders are available in 42 different standard models ranging from 2 - 100 tons capacity with a 10,000 psi maximum pressure rating.
Buffalo Hydraulic Custom Hydraulic Cylinders
Buffalo Hydraulic DA8.00X5.00X32-SPL, Custom, Hydraulic Cylinder. Double-acting with custom flange mount design. Ø8.00″ Bore. Ø5.00″ Chrome rod. 32.00″ Stroke. 175,000 lbs. force. Ø24″, 8-bolt flange for fixture...
SPX Power Team C104C & RSS-1002 Cylinders
Power Team C104C 10 Ton Hydraulic Cylinder. 10 Tons capacity @8,945 psi (Maximum pressure). Single acting, spring return. 6.75″ Collapsed height. 4.13″ Stroke/travel. 9796 Quick...
BVA Hydraulics Hollow Plunger Jacking Cylinders
BVA Hydraulics HC Series of 10,000 psi, single acting, spring return, hollow plunger hydraulic cylinders are offered in 11 standard models ranging from 12-100 tons capacity. All BVA Hydraulics cylinders are designed, manufactured, and tested to meet or exceed industry standard ASME B30.1.
BVA Hydraulics Low Profile Hydraulic Jacking Cylinders
BVA Hydraulics H0500 Low Profile Hydraulic Cylinders. 5 Tons capacity – each @9,091 p.s.i. Single acting, spring return. 1.63″ Minimum height. 0.63″” Stroke/travel. 1.85 Lbs....
Buffalo Hydraulic Custom Hydraulic Cylinders
Buffalo Hydraulic BHDA5.00X2.50-50-SPL. Custom design, double-acting hydraulic cylinder. Ø5.00″ Bore. Ø2.50 Stainless steel, industrial hard chrome rod. 50.00″ Stroke. 3,000 p.s.i. maximum operating pressure. Custom, rod...
Power Team R1502 High-Tonnage, Hydraulic Jacking Cylinder
Power Team R1502 Hydraulic Jacking Cylinder. 10,000 psi Maximum operating pressure. 300,000 lbs. Capacity (150 T) @9,778 p.s.i. Single-acting, high-cycle design. 7.06″ Minimum height. 2.00″ Stroke/Travel....
Reviews
There are no reviews yet.