Buffalo Hydraulic proudly serves as a Platinum Distributor as well as a Factory Authorized Warranty Service Center for SPX Power Team – Hydraulic Technologies hydraulic products.
“Power Team” is a registered trademark of the SPX FLOW Hydraulic Technologies division of SPX FLOW
Inc. (“SPX FLOW”). All Power Team products and parts, with the exceptions noted below, are warranted
against defects in materials and workmanship for the life of the product or part. (The life of the product or part
is defined as that point in time when it no longer safely or properly functions due to normal wear). Chains,
batteries, electric motors, gas engines, knives and cutter blades which are sold with Power Team products are
not covered by this warranty and instead are warranted as follows:
• Electronics are warranted against defects in materials and workmanship for a period of one year from date
of purchase.
• Consumable parts or accessories, including without limitation, chains, batteries, knives and cutter blades
are warranted against defects in materials and workmanship for a period of one year from date of purchase.
• All electric motors and gas engines are separately warranted by their respective manufacturer under the
terms and conditions stated in their separate warranty.
The foregoing warranties do not cover ordinary wear and tear or any product or part that has been worn out,
abused, heated, ground or otherwise altered, used for a purpose other than that for which it was intended or
used in a manner inconsistent with any instructions regarding its use.
To qualify for warranty consideration, return the Power Team product, freight prepaid, to a Power Team
authorized repair center or to the SPX FLOW factory. If any product or part manufactured by SPX FLOW
found to be defective by SPX FLOW, in its sole judgment, SPX FLOW will, at its option, either repair or replace
such defective product or part and return it via best ground transportation, freight prepaid. THIS REMEDY
SHALL BE THE EXCLUSIVE REMEDY AVAILABLE FOR ANY DEFECTS IN THE PRODUCTS OR PARTS
MANUFACTURED AND SOLD BY SPX FLOW OR FOR DAMAGES RESULTING FROM ANY OTHER CAUSE
WHATSOEVER, INCLUDING WITHOUT LIMITATION, SPX FLOW’S NEGLIGENCE. SPX FLOW SHALL
NOT, IN ANY EVENT, BE LIABLE TO ANY BUYER FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
OF ANY KIND, WHETHER FOR DEFECTIVE OR NON-CONFORMING GOODS, NEGLIGENCE, ON THE
BASIS OF STRICT LIABILITY OR FOR ANY OTHER REASON.
SPX FLOW’s PowerThonTM Warranty is expressly limited to persons who purchase Power Team products or
parts for the resale or for use in the ordinary course of the buyer’s business.
THIS WARRANTY IS EXCLUSIVE, AND SPX FLOW MAKES NO OTHER WARRANTY OF ANY KIND
WHATSOEVER, EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCTS MANUFACTURED AND
SOLD BY IT, WHETHER AS TO MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY
OTHER MATTER. No agent, employee, or representative of SPX FLOW has any authority to bind SPX FLOW
to any affirmation, representation, or warranty concerning Power Team products or parts, except as stated
herein.
The purpose of this exclusive remedy shall be to provide the buyer with repair or replacement of products
or parts manufactured by SPX FLOW found to be defective in materials or workmanship or negligently
manufactured. This exclusive remedy shall not be deemed to have failed of its essential purpose so long as
SPX FLOW is willing and able to replace said defective products or parts in the prescribed manner.
Any inconsistent terms contained in SPX FLOW’s Standard Terms and Conditions, or other SPX FLOW terms
or warranty documents, shall not be interpreted to modify or limit this PowerThonTM Warranty. For the avoidance
of doubt, this PowerThonTM Warranty is applicable only to Power Team products and does not apply to any
other SPX FLOW products.
SPX Power Team, PE184 Vanguard Jr. Series, Electric-Hydraulic Pump
All BVA Hydraulics products adhere to ISO9001 Quality Assurance Standards and all BVA Hydraulics cylinders are designed, manufactured, and tested to meet or exceed ASME B30.1 standards and are covered by BVA Hydraulics Limited Lifetime Warranty.
BVA Hydraulics PG Series of gasoline engine and diesel engine-driven hydraulic pumps offer a high-performance source for any application where a/c power isn't available.
This family of 10,000 psi pumps is offered with 5.5 Hp, and 10.2 Hp Honda gasoline engines and 7.3 Hp HATZ diesel engines for use with 10,000 psi high tonnage single-acting and double-acting cylinders. With reservoir volumes ranging from 5 - 40 gallons, this series of pumps will make a great starting point for providing high flow, high pressure for the most demanding high tonnage hydraulic jacking system!
Buffalo Hydraulic proudly serves as a Factory Authorized Distributor as well as a Factory Authorized Warranty/Service Center for all BVA Hydraulics products. This close working team approach will provide you with any and all technical support you require, before, during your purchase, and after your electric-hydraulic pump is in use - Please call today and let us know how we can help in support of your high-pressure hydraulic project!
© 2016 Buffalo Hydraulics. All Rights Reserved. Buffalo NY Web Design by Newbird
Reviews
There are no reviews yet.