Power Team RD2514 Double Acting Hydraulic Jacking Cylinder
Power Team’s RD Family of hydraulic cylinders provide reliable performance when 10,000 psi, double acting hydraulic cylinders are needed to bend, jack, lift, press, pull or push loads ranging from 10 – 500 tons per point.
Inquire about Power Team RD2514 Double Acting Hydraulic Jacking Cylinder
Power Team RD2514 Double Acting Hydraulic Jacking Cylinder.
- 10,000 psi maximum operating pressure.
- Double acting design.
- 23 Standard models ranging from 10 – 500 tons capacity (Advance).
- Built in rod end relief valve on all RD models.
- RD2514 shown.
- 51,500 lbs. force @10,000 psi – Advance.
- 16,100 lbs. force @10,000 psi – Retract.
- 4.00″ Outside diameter.
- 4.00″, 12 X 1.63″ long engineered, rod end collar thread.
- 2.13″ Diameter chrome rod.
- 1.50″, 16 X 1.00″ deep female plunger thread.
- Four 0.50″, 13 X 0.75″ deep threaded base mounting holes are included on a 2.75″ diameter bolt circle.
- Advance and Retract quick disconnect coupler included on all RD models.
- All models meet ANSI ASME B30 .1 Standards
Related Products
BVA Hydraulics High Tonnage Hydraulic Jacking Cylinders
BVA Hydraulics H Series of 10,000 psi, single acting, spring return hydraulic cylinders are offered in 42 standard models ranging from 5-100 tons capacity. All BVA Hydraulics products are manufactured through ISO 9001 strict compliance and all BVA Hydraulics cylinders are designed, manufactured, and tested to meet or exceed industry standard ASME B30.1.
Buffalo Hydraulic Custom Hydraulic Cylinders
Buffalo Hydraulic DA8.00X5.00X32-SPL, Custom, Hydraulic Cylinder. Double-acting with custom flange mount design. Ø8.00″ Bore. Ø5.00″ Chrome rod. 32.00″ Stroke. 175,000 lbs. force. Ø24″, 8-bolt flange for fixture...
Buffalo Hydraulic Custom Lock Nut Hydraulic Cylinders
Buffalo Hydraulic SALN60X24-SPL Hollow Plunger, Lock Nut Cylinders. 65 Tons force each @10,000 p.s.i. Single-acting, through-hole design. 37.25″ Retracted height. 24.00″ Stroke. Ø2.50″ Through hole. Equipped...
Buffalo Hydraulic Custom Pull-Force Hydraulic Cylinders
Buffalo Hydraulic BHDAP4.00X2.00X60.00-SPL Custom-designed, double-acting, pull hydraulic cylinders. Ø4.00″ Bore. Ø2.25″ Chrome rod. Steel piston & gland. 3,000 p.s.i. operating retract (Pull) pressure. 28,000 lbs. pull force...
BVA Hydraulics Low Profile HL1002, 100 Tons Capacity Hydraulic Jacking Cylinder
BVA Hydraulics HL Series of 10,000 psi hydraulic cylinders offer a low height, high tonnage solution with a capacity range from 10-100 tons through six standard models.
Buffalo Hydraulic Custom Low Profile Jacking Cylinders
Buffalo Hydraulic LS30DR-SPL Hydraulic Load Cell. 30 Tons capacity. Low height, compact design. Custom base support. Certified pressure gauge traceable to The Bureau of Weights...
BVA Hydraulics HG Series High Tonnage Jacking Cylinders
BVA Hydraulics HL10002 Low Profile Hydraulic Cylinder. 98.2 Tons each @10,000 p.s.i. 5.55″ Collapsed height. 2.24″ Stroke/travel. Low Profile, single acting, spring return. 45 Lbs....
SPX Power Team R10006D High Tonnage Cylinder
Power Team R1006D Hydraulic Cylinder. Double acting design. 100 Tons force @9,695 p.s.i. 10.64″ Collapsed height. 6.00″ Stroke/Travel. Ø6.50″ Outside diameter. 81 Lbs.
Buffalo Hydraulic High Tonnage Hydraulic Cylinders
Buffalo Hydraulic DA500X40-FLSPL Hydraulic Cylinder. Double-acting high cycle design. 500 Tons pressing force @10,000 p.s.i. 32″ X 32″ Custom rod end flange mount. 40.00″ Stroke/travel....
Buffalo Hydraulic High Tonnage Hydraulic Jacking Cylinder
Buffalo Hydraulic DA10.0X38.5-SPL Hydraulic Cylinder. Double-acting, rugged design. 274,750 Maximum pressing force. Ø10.00″ Bore. 38.50″ Stroke/travel. Equipped with custom over-center load holding valve.