Search

   (716) 893-6510

  sales@buffalohydraulic.com

75+ Years of Experience

No products in the wishlist.

Menu
Search

Hydraulic Presses

Return to Previous Page

Hydraulic Presses

Buffalo Hydraulic is a factory-authorized distributor for eight, industry-leading manufacturers of pneumatic & hydraulic presses. We offer a variety of high-quality hand hydraulic, air-operated, and electric hydraulic presses in any standard global operating voltage.

100’s of standard, pre-designed models of ‘C’ frame, ‘H’ frame, 4 post, bench type, and floor models are readily available. Our presses are well suited for assembly, bearing removal and installation, fabrication, and straightening applications. With over 80 years of experience in the hydraulics industry, we have the ability and expertise to offer complex, custom press designs.  Each press is constructed with the highest quality materials and is built to last through many years and several projects.

If you have any questions about any of our products, be sure to contact us today. For more information, please call (716) 893-6510, email us at sales@buffalohydraulic.com, or access the contact tab at the top of this page!

Filters
Grid
List
Show
Per page
,

Buffalo Hydraulic Custom, 25 Tons Capacity C-Press

Buffalo Hydraulic has been selling high-pressure, high-tonnage hydraulic equipment for over 80 years.  During these past eight decades, we've always offered service on all products, components, and systems sold.

Buffalo Hydraulic is a Factory Authorized Warranty/Service Center for all BVA Hydraulics products and we're proud to offer our support to you.  Whether you require technical support, general repairs on any BVA product that has been in service for many years, need a repair evaluation, or in the unlikely event you're experiencing a problem on a newer product, we're glad to help!

BVA Hydraulics Limited Lifetime Warranty

BVA products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA's option) at BVA's expense for the life of the product.   This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries, and other parts or materials sold with or as part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer's warranty and not the BVA Limited Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.
,

BVA Hydraulics-30 Tons Capacity, Electric-Hydraulic, C-Press

From 1 - 200 tons capacity, an endless variety of high force hydraulic c-presses and h-frame presses, and the ability to provide a custom press to meet your project requirement, Buffalo Hydraulic can meet your most rigorous pressing needs! With a confidence-on-quality process, BVA Hydraulics manufacturing, management, and operations meet or exceed ISO 9001 standards. Buffalo Hydraulic has nearly 75 years of high-pressure, high-tonnage hydraulic sales and technical experience and can serve to support your most demanding high-force, hydraulic pressing project.  Together, we're here to offer our assistance in any way - Please call and let us know more about your next project!

Buffalo Hydraulic, Custom 10 Tons Capacity, Electric-Hydraulic, C-Press

Whether your pressing requirements require a hydraulic c-press design, h-frame, bench mount, or floor model, Buffalo Hydraulic has a solution.

We're glad to work with you to provide the dimensional, technical, and pressing force needed for your most demanding high-force pressing application!

Buffalo Hydraulic Custom 10T, Electric-Hydraulic Bench Press

With an endless variety of hand-operated, air-hydraulic, and electric-hydraulic pumps, Buffalo Hydraulic can offer a hydraulic c-press or h-frame press to meet your requirements - Please call today for assistance with your pressing project!
,

BVA Hydraulics 25 Tons Capacity, Custom Design, Electric-Hydraulic Press

BVA Hydraulics IAP, IEP, and IMP Series of Hydraulic Presses are offered through (19) standard models with a broad range of 25-100 tons of pressing force. IA Models include an air/hydraulic pump. IEP Models are supplied with an electric/hydraulic pump. IMP Models include a two-stage, hand/hydraulic pump. If your pressing requirements require something different from the standard models, please let us know - We'll be glad to help further meet your specifications.
,

BVA Hydraulics, Custom Design, Electric-Hydraulic, C Press

For nearly 80 years, Buffalo Hydraulic has been selling high-pressure, high-tonnage hydraulic equipment.  Throughout these past eight decades, we've always offered service on all products, components, and systems sold.

Serving as a BVA Hydraulics Factory Authorized Distributor, Buffalo Hydraulic is eager to work with you in support of your most demanding high-pressure, high-tonnage, hydraulic project.

As a BVA Hydraulics Factory Authorized Warranty/Service Center, Buffalo Hydraulic is also proud to help with any repair needs you have.

Showing 1–6 of 62 results

buffalo-hydraulic-white

The passion and drive for our company along with the customers we serve originated in 1948 when Leo Phillips began selling & servicing hydraulic equipment.  Launched with a focus on supporting the local Western New York industry, Buffalo Hydraulic was founded.

Buffalo, NY 14211
Email: sales@buffalohydraulic.com
Phone: (716) 893-6510

USEFUL LINKS

RECENT PRODUCTS

SPX Power Team, PE184 Vanguard Jr. Series, Electric-Hydraulic Pump

Buffalo Hydraulic proudly serves as a Platinum Distributor as well as a Factory Authorized Warranty Service Center for SPX Power Team - Hydraulic Technologies hydraulic products.

“Power Team” is a registered trademark of the SPX FLOW Hydraulic Technologies division of SPX FLOW Inc. (“SPX FLOW”). All Power Team products and parts, with the exceptions noted below, are warranted against defects in materials and workmanship for the life of the product or part. (The life of the product or part is defined as that point in time when it no longer safely or properly functions due to normal wear). Chains, batteries, electric motors, gas engines, knives and cutter blades which are sold with Power Team products are not covered by this warranty and instead are warranted as follows: • Electronics are warranted against defects in materials and workmanship for a period of one year from date of purchase. • Consumable parts or accessories, including without limitation, chains, batteries, knives and cutter blades are warranted against defects in materials and workmanship for a period of one year from date of purchase. • All electric motors and gas engines are separately warranted by their respective manufacturer under the terms and conditions stated in their separate warranty. The foregoing warranties do not cover ordinary wear and tear or any product or part that has been worn out, abused, heated, ground or otherwise altered, used for a purpose other than that for which it was intended or used in a manner inconsistent with any instructions regarding its use. To qualify for warranty consideration, return the Power Team product, freight prepaid, to a Power Team authorized repair center or to the SPX FLOW factory. If any product or part manufactured by SPX FLOW found to be defective by SPX FLOW, in its sole judgment, SPX FLOW will, at its option, either repair or replace such defective product or part and return it via best ground transportation, freight prepaid. THIS REMEDY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE FOR ANY DEFECTS IN THE PRODUCTS OR PARTS MANUFACTURED AND SOLD BY SPX FLOW OR FOR DAMAGES RESULTING FROM ANY OTHER CAUSE WHATSOEVER, INCLUDING WITHOUT LIMITATION, SPX FLOW’S NEGLIGENCE. SPX FLOW SHALL NOT, IN ANY EVENT, BE LIABLE TO ANY BUYER FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND, WHETHER FOR DEFECTIVE OR NON-CONFORMING GOODS, NEGLIGENCE, ON THE BASIS OF STRICT LIABILITY OR FOR ANY OTHER REASON. SPX FLOW’s PowerThonTM Warranty is expressly limited to persons who purchase Power Team products or parts for the resale or for use in the ordinary course of the buyer’s business. THIS WARRANTY IS EXCLUSIVE, AND SPX FLOW MAKES NO OTHER WARRANTY OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCTS MANUFACTURED AND SOLD BY IT, WHETHER AS TO MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY OTHER MATTER. No agent, employee, or representative of SPX FLOW has any authority to bind SPX FLOW to any affirmation, representation, or warranty concerning Power Team products or parts, except as stated herein. The purpose of this exclusive remedy shall be to provide the buyer with repair or replacement of products or parts manufactured by SPX FLOW found to be defective in materials or workmanship or negligently manufactured. This exclusive remedy shall not be deemed to have failed of its essential purpose so long as SPX FLOW is willing and able to replace said defective products or parts in the prescribed manner. Any inconsistent terms contained in SPX FLOW’s Standard Terms and Conditions, or other SPX FLOW terms or warranty documents, shall not be interpreted to modify or limit this PowerThonTM Warranty. For the avoidance of doubt, this PowerThonTM Warranty is applicable only to Power Team products and does not apply to any other SPX FLOW products.

Buffalo Hydraulic Custom-Design, Double-Acting, Flange Mount Pressing Cylinders

Buffalo Hydraulic Custom-Design, Double-Acting, Flange Mount Pressing Cylinders 3,00 psi maximum pressure. Double-acting, flange-mount design. 84,823 lbs. (42.4T) each at 3,000 p.s.i. ø6.00″ Internal bore....
,

BVA Hydraulics HLNF20002 Low Profile, Lock-Nut Design 200T Jacking Cylinder

Buffalo Hydraulic proudly serves as a Factory Authorized Stocking Distributor as well as a Factory Authorized Warranty/Service Center for all BVA Hydraulics products. ASME B30.1 BVA Hydraulics hydraulic cylinders are designed, built, and tested to meet or exceed ASME B30.1 standards. ISO 9001 Quality Assurance BVA Hydraulics products are manufactured through an International Quality Assurance System, ISO 9001, involving consistent oversight of administration, management, manufacturing, and production control.  Under this system, the related operations are monitored on all aspects from the purchase order to the assembly line and through to shipping the order. BVA Limited Lifetime Warranty All BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.  Contact BVA or Buffalo Hydraulic for the disposition of this warranty. This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries, and other parts or materials sold with or part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.

© 2016 Buffalo Hydraulics. All Rights Reserved. Buffalo NY Web Design by Newbird

Terms and Conditions