BVA Hydraulics PE50S3L15A, 10,000 PSI, Electric-Hydraulic Pump
For over 80 years, Buffalo Hydraulic has been selling high-pressure, high-tonnage hydraulic equipment. Throughout these past eight decades, we’ve always offered service on all products, components, and systems sold.
Buffalo Hydraulic is a Factory Authorized Warranty/Service Center for all BVA Hydraulics products and we’re proud to offer our support to you. Whether you require technical support, general repairs on any BVA Hydraulics product that has been in service for many years, are needing a repair evaluation, or in the unlikely event you’re experiencing a problem on a newer component, we’re glad to help!
BVA Hydraulics Limited Lifetime Warranty
BVA Hydraulics products are warranted to be free of defects in materials and workmanship. Any BVA Hydraulics product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.
This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers. All electric motors, gas engines, batteries, and other parts or materials sold with or as part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Limited Lifetime Warranty. BVA shall not be liable for consequential or incidental damage or loss.
Inquire about BVA Hydraulics PE50S3L15A, 10,000 PSI, Electric-Hydraulic Pump
BVA Hydraulics PE50S3L15A, 10,000 PSI, Electric-Hydraulic Pump
- 10,000 psi Maximum pressure.
- 120 VAC, 1 Ph., 60 hz. Operating voltage.
- High flow, 2- stage design.
- 475 cu.” of oil per minute at 700 psi (1st Stage).
- 61 cu.” of oil per minute @10,000 psi (2nd Stage).
- 3/Way, 3/position solenoid operated directional locking valve.
- OSHA approved sound level – 80 dBA.
- 15 gallons standard oil reservoir.
- 24V hand-held solenoid valve control pendant (Advance/Retract).
- Internal relief valve set at 10,000 psi.
- 100% Duty cycle, NEMA 5 enclosure.
Related Products
BVA Hydraulics High Pressure Hydraulic Pumps
BVA Hydraulics PA2000 High-Pressure Air Hydraulic Pumps 110 – 175 p.s.i. Input shop air. 10,000 p.s.i. Output hydraulic pressure. 65 cu.” Of oil per minute...
SPX Power Team High Pressure Electric Pump
Power Team PE462S Electric Hydraulic Pump 115 VAC, 1 ph., 60 Hz., 1½ Hp., induction motor. 2.5 gallon reservoir. Solenoid operated directional valve. 25′ Hand...
BVA Hydraulics 10,000 PSI Air Hydraulic Pumps
BVA Hydraulics PA1500B 10,000 PSI Air Hydraulic Pumps 110 – 175 p.s.i. Input shop air. 10,000 p.s.i. Output hydraulic pressure. 66 cu.” Of oil per...
BVA Hydraulics 10,000 PSI Honda Gas Engine Hydraulic Pump
BVA Hydraulics PG Series of gasoline engine and diesel engine-driven hydraulic pumps offer a high-performance source for any application where a/c power isn't available.
This family of 10,000 psi pumps is offered with 5.5 Hp, and 10.2 Hp Honda gasoline engines and 7.3 Hp HATZ diesel engines for use with 10,000 psi high tonnage single-acting and double-acting cylinders. With reservoir volumes ranging from 5 - 40 gallons, this series of pumps will make a great starting point for providing high flow, high pressure for the most demanding high tonnage hydraulic jacking system!
Buffalo Hydraulic proudly serves as a Factory Authorized Distributor as well as a Factory Authorized Warranty/Service Center for all BVA Hydraulics products. This close working team approach will provide you with any and all technical support you require, before, during your purchase, and after your electric-hydraulic pump is in use - Please call today and let us know how we can help in support of your high-pressure hydraulic project!
SPX Power Team Electric Hydraulic Pump
Power Team PQ1204S Electric Hydraulic Pump 230 – 460 VAC, 3 Ph., 60 Hz., 3 Hp. 5.7 Gallon reservoir. 3 Position (Advance-Hold-Retract) Solenoid operated directional valve....
SPX Power Team High Pressure Hydraulic Pumps
SPX Power Team P-55 Hydraulic Hand Pumps 55 cu.” Useable oil volume. 0.15 cu.” Of oil per stroke. 10,000 p.s.i. Maximum pressure. Internal relief valve. All steel...
SPX Power Team High Pressure Hydraulic Pump
Power Team PE302-9609 Electric Hydraulic Pump 115 VAC, 1 ph., 60 Hz., 1 Hp., permanent magnet motor. 1.2 gallon reservoir. 82 dBA. 300 cu.” oil per minute @100 p.s.i....
Buffalo Hydraulic Electric Hydraulic Powerunit
Buffalo Hydraulic BHEP7.00X3,200-SVSPL 440 VAC, 3 Ph., 60 hz. 7 gpm @3,200 p.s.i. 10 Gallon reservoir. 4-Way, 3-Position solenoid operated directional valve. Dual, fine metering...
BVA Hydraulics PA1500, 10,000 psi, Air-Hydraulic Pumps
BVA Hydraulics PA Series air-hydraulic pumps are offered through (12) standard models for use with 10,000 psi single and double-acting hydraulic cylinders.
All BVA Hydraulics products adhere to ISO9001 Quality Assurance Standards and are covered by BVA Hydraulics Limited Lifetime Warranty.
BVA Hydraulics PG90M4N10 – 10,000 PSI, Gas Engine Hydraulic Pumps
BVA Hydraulics offers an endless variety of gas engine and diesel engine-driven, 10,000 psi hydraulic pumps. Honda engines are standard on all 5.5 and 10.2 Hp gas engine models while a HATZ 7.2 Hp serves as the power for the 80 Series diesel models. With a confidence-on-quality process, BVA Hydraulics manufacturing, management, and operations meet or exceed ISO 9001 standards. Buffalo Hydraulic has nearly 80 years of high-pressure, high-tonnage hydraulic sales and technical experience and can serve to support your most demanding project. Together, we're here to offer our assistance in any way - Please call and let us know more about your next project!
Reviews
There are no reviews yet.