Search

   (716) 893-6510

  [email protected]

75+ Years of Experience

No products in the wishlist.

Menu
Search

Return to Previous Page
Zoom images

Power Team PE554 10,000 PSI Electric Hydraulic Pump

The Power Team PE 55 Series of electric hydraulic pumps offers a rugged design for use with 10,000 psi applications of bending, crimping, cutting, jacking, lifting, pressing, shearing, straightening, stressing, tensioning and torquing.

Spec Sheet
Inquire About This Product

Add to Wishlist
Category:
Description

Power Team PE554 Electric Hydraulic Pump

  • Internal relief valve set to bypass at 10,000 psi.
  • 115 VAC and 230 VAC, 1 Ph., 50/60 Hz.
  • 25 amps at 10,000 psi with 115 VAC models, 15 amps with 230 VAC models.
  • 704 cu.” of oil per minute at start up to 55 cu.” per minute @10,000 psi (2nd Stage).
  • 4/way, 3/position manually operated, shear seal directional valve with Posi-Check feature for increased pressure/load holding quality (shown).
  • 10′ hand held motor control pendant.
  • 2 1/2 gallons oil reservoir – 10 gallons option available on all models.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Power Team PE554 10,000 PSI Electric Hydraulic Pump”

Related Products

SPX Power Team High Pressure Hydraulic Pump

Power Team PE302-9609 Electric Hydraulic Pump 115 VAC, 1 ph., 60 Hz., 1 Hp., permanent magnet motor. 1.2 gallon reservoir. 82 dBA. 300 cu.” oil per minute @100 p.s.i....

Buffalo Hydraulic Custom, Gas-Engine Hydraulic Power Units

Buffalo Hydraulic BHGP5.0X5.5-3,000-SPL Gas Powered Hydraulic Power unit Custom, high-volume design. 5½ Hp. Honda gasoline engine. 5.0 gpm @3,000 p.s.i. – maximum operating pressure. High...

SPX Power Team High Pressure Electric Pump

Power Team PE462S Electric Hydraulic Pump 115 VAC, 1 ph., 60 Hz., 1½ Hp., induction motor. 2.5 gallon reservoir. Solenoid operated directional valve. 25′ Hand...

SPX Power Team Electric Hydraulic Pump

Power Team PQ1204S Electric Hydraulic Pump 230 – 460 VAC, 3 Ph., 60 Hz., 3 Hp. 5.7 Gallon reservoir. 3 Position (Advance-Hold-Retract) Solenoid operated directional valve....

SPX Power Team PE-400 Series Electric Pumps.

Power Team PE4004  Electric Hydraulic Pumps. 10,000 p.s.i. Maximum pressure. Internal relief valve. 230/460 VAC, 3 Ph., 60 Hz., 10 Hp. 1,200 cu,” of oil...

BVA Hydraulics PA1500, 10,000 psi, Air-Hydraulic Pumps

BVA Hydraulics PA Series air-hydraulic pumps are offered through (12) standard models for use with 10,000 psi single and double-acting hydraulic cylinders.

All BVA Hydraulics products adhere to ISO9001 Quality Assurance Standards and are covered by BVA Hydraulics Limited Lifetime Warranty.

BVA Hydraulics High Pressure Hydraulic Pumps

BVA Hydraulics PA2000 High-Pressure Air Hydraulic Pumps 110 – 175 p.s.i.  Input shop air. 10,000 p.s.i. Output hydraulic pressure. 65 cu.” Of oil per minute...

SPX Power Team High Pressure Electric Hydraulic Pumps

SPX Hydraulic Pump – Electric PE462S This SPX Hydraulic Pump features a lightweight design with corrosion resistance. Additional features and specifications include: 115 VAC, 1 Ph., 60...

SPX Power Team High Pressure Hydraulic Pumps

Power Team 59L Hydraulic Hand Pump 69 cu.” of useable oil volume. 0.72 cu.” of oil per stroke 0 – 850 p.s.i. (1st Stage). 0.15...

SPX Power Team High Pressure Hydraulic Pumps

Power Team P-59 Hydraulic Hand Pumps 55 cu.” useable oil volume. Rugged steel construction. 0.66 cu.” of oil per stroke 0 – 325 p.s.i. (1st...

buffalo-hydraulic-white

The passion and drive for our company along with the customers we serve originated in 1948 when Leo Phillips began selling & servicing hydraulic equipment.  Launched with a focus on supporting the local Western New York industry, Buffalo Hydraulic was founded.

Buffalo, NY 14211
Email: [email protected]
Phone: (716) 893-6510

USEFUL LINKS

RECENT PRODUCTS

,

BVA PU55M3N025B Universal Motor, Electric-Hydraulic Pump

Brand Loyalty Versus Quality Control

It's easy to fall back on the old standby, but when you are given the option of greater control over your orders from raw material sourcing to drop shipping directly to a job site, the choice is clear. Every step of the way, BVA Hydraulics provides personal care in everything from testing their product up to 10,000 cycles and giving flexibility of customization on orders. Choosing a high-pressure hydraulics supplier doesn't have to be complicated.  BVA Hydraulics offers as much value as possible to ensure safety and reliability through all of its products. As a Factory Authorized Distributor and Warranty/Service Center, and with nearly 80 years of high-pressure, high-tonnage hydraulic experience, Buffalo Hydraulic is proud to partner with BVA Hydraulics in this way to serve your needs.

ISO 9001 Quality Assurance

BVA Hydraulics products are manufactured through an International Quality Assurance System, ISO 9001 which involves consistent observation of administration, management, manufacturing, and production control.  Under this system, the related operations are monitored on all aspects from the purchase order to the assembly line and through to shipping the order.

BVA Limited Lifetime Warranty

All BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.  Contact BVA or Buffalo Hydraulic for the disposition of this warranty. This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries,s and other parts or materials sold with or as part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.
,

Buffalo Hydraulic Custom, 25 Tons Capacity C-Press

Buffalo Hydraulic has been selling high-pressure, high-tonnage hydraulic equipment for over 80 years.  During these past eight decades, we've always offered service on all products, components, and systems sold.

Buffalo Hydraulic is a Factory Authorized Warranty/Service Center for all BVA Hydraulics products and we're proud to offer our support to you.  Whether you require technical support, general repairs on any BVA product that has been in service for many years, need a repair evaluation, or in the unlikely event you're experiencing a problem on a newer product, we're glad to help!

BVA Hydraulics Limited Lifetime Warranty

BVA products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA's option) at BVA's expense for the life of the product.   This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries, and other parts or materials sold with or as part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer's warranty and not the BVA Limited Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.
,

BVA Hydraulics HDC6006, 60T Capacity, Through-Hole Cylinder

ASME B30.1

BVA Hydraulics hydraulic cylinders are designed, built and tested to meet or exceed ASME B30.1 standards.

ISO 9001 Quality Assurance

BVA Hydraulics products are manufactured through an International Quality Assurance System, ISO 9001 which involves consistent observation of administration, management, manufacturing, and production control.  Under this system, the related operations are monitored on all aspects from the purchase order to the assembly line and through to shipping the order.

BVA Limited Lifetime Warranty

Buffalo Hydraulic proudly serves as a Factory Authorized Stocking Distributor as well as a Factory Authorized Warranty/Service Center for all BVA Hydraulics products. All BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.  Contact BVA or Buffalo Hydraulic for the disposition of this warranty. This warranty does not cover ordinary wear and tear, abuse, misuse, alteration or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries and other parts or materials sold with or part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.

© 2016 Buffalo Hydraulics. All Rights Reserved. Buffalo NY Web Design by Newbird

Terms and Conditions