Search

   (716) 893-6510

  [email protected]

75+ Years of Experience

No products in the wishlist.

Menu
Search

Return to Previous Page
Zoom images

Buffalo Hydraulic Custom Hydraulic Press

Spec Sheet
Inquire About This Product

Add to Wishlist
Category:
Description

Buffalo Hydraulic BHEHP-55X13-SPL Custom Electric Hydraulic, H Frame Press

  • 110,000 lbs. Capacity.
  • 36.00″ Horizontal opening.
  • 80.00″ Vertical opening.
  • 10.00″ Side pass through.
  • 13.13″ Stroke/travel.

This press package offers (3) lower bed positions and is equipped with a double-acting cylinder. A custom-equipped electric hydraulic pump provides the cylinder Advance-Hold-Retract function.  Used in a specific bearing load testing application, an auxiliary 10,000 psi hand pump was also incorporated into the circuit. This addition allowed the testing procedure to target the most specific ranges and monitor that load without pressure decay.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Buffalo Hydraulic Custom Hydraulic Press”

Related Products

Buffalo Hydraulic 5,000 psi Salt Water Intensification Custom System

Buffalo Hydraulic BHCSY5000-ACM-SPL 115 VAC, 1 Ph., 60 Hz. 5,000 psi Operating Pressure. Stainless Steel Accumulator. Petroleum Based Oil Inlet. Pressurized Water Outlet. This custom-designed...

SPX Power Team Hydraulic Jacking Systems

SPX Power Team High-Pressure Hydraulic Pump & Cylinder Sets P-59 High-Pressure Hydraulic Hand Pump Internal relief valve – 10,000 psi Maximum pressure. High displacement 2-stage...

Buffalo Hydraulic Custom Hydraulic Pressing System

Buffalo Hydraulic BHEHP10X8.00-SPL. Custom Electric Hydraulic Press 115 VAC, 2-stage electric hydraulic pump. 3 Position, solenoid-operated directional valve. Hand-held, push button pendant (Advance-Hold-Retract). Adjustable pressure...

Buffalo Hydraulic Custom Electric-Hydraulic Power Units

Buffalo Hydraulic BHEP3000-5-SV-SPL Custom Electric Hydraulic Powerunit Custom-designed electric hydraulic pump. 3,000 psi Maximum operating pressure. 5 Gallons Per Minute. 115 VAC, 60 Hz., 1...

Buffalo Hydraulic Custom Electric-Hydraulic Systems

Buffalo Hydraulic BHEHDC-SPL Telescopic Electric Hydraulic Die Change Table 36.00″ wide. 78.00″ double-acting telescopic travel. Electric hydraulic operation. A custom design to deliver the means...

Buffalo Hydraulic PC Based Hydraulic System

Buffalo Hydraulic BHCSY4.00X25X10-SPL PC-based, hydraulic jacking system. 25 tons capacity each (as shown). Independent linear &  pressure monitoring. Console mounted and easily customized.  Most global operating...

Power Team 150 Tons Capacity Weldment Straightening

Power Team R1506C 153.40 Tons Capacity. 10,000 psi Maximum Operating Pressure. 10.38″ Collapsed Height. 6.00″ Stroke. Single Acting – Load Return. 151 Lbs.

Buffalo Hydraulic Custom Electric Hydraulic Powerunits

Buffalo Hydraulic BHEHP25X3000ACP-SPL Custom electric hydraulic power unit. 2,800 psi maximum operating pressure. 25 gpm. 50 Gallons reservoir. 460 VAC, 3 Ph., 60 Hz., 10...

Buffalo Hydraulic Custom Electric Hydraulic Powerunits

Buffalo Hydraulic BHEHP20X3000ACP-SPL Custom-designed electric hydraulic power unit. 3,000 psi maximum operating pressure. 20 gpm. 50 Gallons reservoir. 460 VAC, 3 Ph., 60 Hz. 3...

Buffalo Hydraulic 30,000 PSI Test Pump

Buffalo Hydraulic BHAHP-30000-SPL Custom Air Hydraulic Test Pump 30,000 psi Maximum output operating pressure. 120 psi input air pressure. Output system pressure is easily adjusted...

buffalo-hydraulic-white

The passion and drive for our company along with the customers we serve originated in 1948 when Leo Phillips began selling & servicing hydraulic equipment.  Launched with a focus on supporting the local Western New York industry, Buffalo Hydraulic was founded.

Buffalo, NY 14211
Email: [email protected]
Phone: (716) 893-6510

USEFUL LINKS

RECENT PRODUCTS

,

BVA Hydraulics PE50W4N03A, 10,000 PSI Electric-Hydraulic Pump

Is where your hydraulic components come from important to you?

In a time when leading competitors are increasingly outsourcing to China, BVA Hydraulics is proud to have the unique advantage of owning and operating their high-pressure hydraulics manufacturing plant in Taiwan since 1971 - Nearly 45 years now! Taiwanese manufacturing is known worldwide as being among the highest of modern quality, putting the country on the short list of TAA-compliant regions.  BVA Hydraulics' ability to eliminate the middleman to source raw materials with supply chain stability sets them above other high-pressure hydraulics manufacturers.  This, along with nearly 100,000 square feet of office, warehouse, testing facilities, and product showrooms in Kansas City Missouri provides a perfect combination! BVA Hydraulics is proud to be TAA Compliant The 1979 Trade Agreements Act (TAA) Ever wonder what TAA compliance is and why it matters? TAA, or the Trade Agreements Act, ensures products are sourced from designated countries—like BVA's manufacturing home in Taiwan—for government contracts. This guarantees quality, supports local economies, and meets strict procurement standards. Choosing TAA-compliant products means reliability and supporting ethical sourcing. Amidst a trend of competitors turning to outsourcing in China, We at BVA proudly distinguish ourselves by owning and operating our high-pressure hydraulics manufacturing plant in Taiwan since 1971. Taiwanese manufacturing is globally renowned for its top-tier quality, positioning the country among the premier TAA-compliant regions. By managing our facility directly, we streamline the sourcing of raw materials and enhance our ability to customize orders with unmatched flexibility

Brand Loyalty Versus Quality Control

It's easy to fall back on the old standby, but when you are given the option of greater control over your orders from raw material sourcing to drop shipping directly to a job site, the choice is clear. Every step of the way, BVA Hydraulics provides personal care in everything from testing their product up to 10,000 cycles and giving flexibility of customization on orders. Choosing a high-pressure hydraulics supplier doesn't have to be complicated.  BVA Hydraulics offers as much value as possible to ensure safety and reliability through all of its products. As a Factory Authorized Distributor and Warranty/Service Center, and with nearly 80 years of high-pressure, high-tonnage hydraulic experience, Buffalo Hydraulic is proud to partner with BVA Hydraulics in this way to serve your needs.

ASME B30.1

BVA Hydraulics hydraulic cylinders are designed, built, and tested to meet or exceed ASME B30.1 standards. Buffalo Hydraulic proudly serves as a Factory Authorized Stocking Distributor as well as a Factory Authorized Warranty/Service Center for all BVA Hydraulics products.

ISO 9001 Quality Assurance

BVA Hydraulics products are manufactured through an International Quality Assurance System, ISO 9001 which involves consistent observation of administration, management, manufacturing, and production control.  Under this system, the related operations are monitored on all aspects from the purchase order to the assembly line and through to shipping the order.

BVA Limited Lifetime Warranty

All BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.  Contact BVA or Buffalo Hydraulic for the disposition of this warranty. This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries,s and other parts or materials sold with or part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.
,

BHBLC2000-SPL Buffalo Hydraulic Custom Tension-Weighing Cell

BHBLC2000-SPL Buffalo Hydraulic Custom, 2,000 LBS. Hydraulic Tension-Weighing Cell 0-2,000 lbs. capacity. Industrial hard-chrome cell body. SAE 660 Bronze, internal piston. NIST Certified, glycerin filled,...
,

BVA Hydraulics High-Tonnage, Multi-Circuit Jacking System Console

BVA Hydraulics 10,000 psi multi-port manifolds are modular in design and can be provided in increments of two.  From there and with reservoir volumes through 40 gallons, Buffalo Hydraulic has the experience to offer a high-tonnage hydraulic jacking system with as many jacking points as your project requires.  With jacking cylinders ranging from 1 - 1,000 tons capacity, hose lengths up to 250', and an AutoCAD flow diagram, all systems are delivered, fully assembled, bled, pressure tested, and ready for immediate use!

BVA Limited Lifetime Warranty

All BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.  Contact BVA or Buffalo Hydraulic for the disposition of this warranty.

This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries, and other parts or materials sold with or as part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.

© 2016 Buffalo Hydraulics. All Rights Reserved. Buffalo NY Web Design by Newbird
Terms and Conditions