Search

   (716) 893-6510

  [email protected]

75+ Years of Experience

No products in the wishlist.

Menu
Search

Return to Previous Page
Zoom images

BVA Hydraulics – PE50W4N05A 10,000 p.s.i. Electric Hydraulic Pumps

From a simple electric hydraulic pump with a 1 gallons reservoir and a manually operated directional valve to a complex, high flow, foot switch control, solenoid operated directional valve equipped with a 25 gallons reservoir, industrial casters, and a pressure switch option, the PE30, PE40, and PE 50 Series of 10,000 psi electric hydraulic pumps from BVA offers an endless variety to meet your demanding application requirements.  All models are a 2-stage design, are equipped with an internal 10,000 psi relief valve, and start under full load.

Spec Sheet
Inquire About This Product

Add to Wishlist
Categories: ,
Description

BVA Hydraulics PE50 Series 10,000 p.s.i. Electric-Hydraulic Pumps

  • 10,000 p.s.i. Maximum operating pressure.
  • Modular platform allows for easy customization.
  • Manual and solenoid-operated directional valve options.
  • .5 – 1.5 Hp.
  • 1-25 gallons oil reservoir volume to properly accommodate for cylinder volume.
  • Whisper quiet 80dBA operation.
  • Two-stage design provides a fast & efficient first stage in meeting load.
  • High-quality suction strainers to prevent contamination and pump damage.
  • 120 VAC, 240 VAC, 1 Ph. in 50 & 60 Hz. versions available.
  • 100% Duty cycle, NEMA 5 enclosure, TEFC electric motors.
  • 24 VAC pendant controls for added safety.
  • All units start under full load – No need to dump pressure before building to a higher value.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BVA Hydraulics – PE50W4N05A 10,000 p.s.i. Electric Hydraulic Pumps”

Related Products

Buffalo Hydraulic Custom Electric Hydraulic Pumps

BHEP1.0X2000-SVSPL 115 VAC, 60 Hz., 1 Ph. 231 cu.” Of oil per minute @2,000 p.s.i. Adjustable relief valve. 4-Way, 3-Position solenoid operated directional valve. 10′...

SPX Power Team PE-400 Series Electric Pumps.

Power Team PE4004  Electric Hydraulic Pumps. 10,000 p.s.i. Maximum pressure. Internal relief valve. 230/460 VAC, 3 Ph., 60 Hz., 10 Hp. 1,200 cu,” of oil...

BVA Hydraulics PA1500, 10,000 psi, Air-Hydraulic Pumps

BVA Hydraulics PA Series air-hydraulic pumps are offered through (12) standard models for use with 10,000 psi single and double-acting hydraulic cylinders.

All BVA Hydraulics products adhere to ISO9001 Quality Assurance Standards and are covered by BVA Hydraulics Limited Lifetime Warranty.

BVA Hydraulics High Pressure Hydraulic Pumps

BVA Hydraulics PA2000 High-Pressure Air Hydraulic Pumps 110 – 175 p.s.i.  Input shop air. 10,000 p.s.i. Output hydraulic pressure. 65 cu.” Of oil per minute...

Buffalo Hydraulic Electric-Hydraulic Powerunits

Buffalo Hydraulic BHEP5.00X3,000-SVSPL 220 VAC, 1 Ph., 60 hz. 5 gpm @3,500 p.s.i. 10 Gallon reservoir. 4-Way, 3-Position solenoid operated directional valve. 10′ Hand held...

Buffalo Hydraulic Custom, Gas-Engine Hydraulic Power Units

Buffalo Hydraulic BHGP5.0X5.5-3,000-SPL Gas Powered Hydraulic Power unit Custom, high-volume design. 5½ Hp. Honda gasoline engine. 5.0 gpm @3,000 p.s.i. – maximum operating pressure. High...

SPX Power Team Custom Hydraulic Hand Pumps

Power Team P460 High Volume Hydraulic Hand Pump 2 gallon reservoir volume. Internal relief valve. 3 Position (Advance-Hold-Retract) Manually operated directional valve. 7.35 cu.” Of oil per...

SPX Power Team High Pressure Hydraulic Pumps

Power Team P-159 High Pressure Hydraulic Hand Pumps 152 cu.” Usebale oil volume. Internal relief valve. 2.60 cu.” Of oil per stroke from 0 –...

SPX Power Team Air Hydraulic Pumps

Power Team PA-6 Air Hydraulic Pumps 40 – 100 p.s.i. Inlet shop air. 10,000 p.s.i. Output hydraulic pressure. 105 cu.” reservoir volume. Foot pedal, hands...

SPX Power Team High Pressure Electric Hydraulic Pumps

SPX Hydraulic Pump – Electric PE462S This SPX Hydraulic Pump features a lightweight design with corrosion resistance. Additional features and specifications include: 115 VAC, 1 Ph., 60...

buffalo-hydraulic-white

The passion and drive for our company along with the customers we serve originated in 1948 when Leo Phillips began selling & servicing hydraulic equipment.  Launched with a focus on supporting the local Western New York industry, Buffalo Hydraulic was founded.

Buffalo, NY 14211
Email: [email protected]
Phone: (716) 893-6510

USEFUL LINKS

RECENT PRODUCTS

,

BVA Hydraulics HDC6006, 60T Capacity, Through-Hole Cylinder

ASME B30.1

BVA Hydraulics hydraulic cylinders are designed, built and tested to meet or exceed ASME B30.1 standards.

ISO 9001 Quality Assurance

BVA Hydraulics products are manufactured through an International Quality Assurance System, ISO 9001 which involves consistent observation of administration, management, manufacturing, and production control.  Under this system, the related operations are monitored on all aspects from the purchase order to the assembly line and through to shipping the order.

BVA Limited Lifetime Warranty

Buffalo Hydraulic proudly serves as a Factory Authorized Stocking Distributor as well as a Factory Authorized Warranty/Service Center for all BVA Hydraulics products. All BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.  Contact BVA or Buffalo Hydraulic for the disposition of this warranty. This warranty does not cover ordinary wear and tear, abuse, misuse, alteration or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries and other parts or materials sold with or part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.
,

BVA Hydraulics PE50W4N03A, 10,000 PSI Electric-Hydraulic Pump

Is where your hydraulic components come from important to you?

In a time when leading competitors are increasingly outsourcing to China, BVA Hydraulics is proud to have the unique advantage of owning and operating their high-pressure hydraulics manufacturing plant in Taiwan since 1971 - Nearly 45 years now! Taiwanese manufacturing is known worldwide as being among the highest of modern quality, putting the country on the short list of TAA-compliant regions.  BVA Hydraulics' ability to eliminate the middleman to source raw materials with supply chain stability sets them above other high-pressure hydraulics manufacturers.  This, along with nearly 100,000 square feet of office, warehouse, testing facilities, and product showrooms in Kansas City Missouri provides a perfect combination! BVA Hydraulics is proud to be TAA Compliant The 1979 Trade Agreements Act (TAA) Ever wonder what TAA compliance is and why it matters? TAA, or the Trade Agreements Act, ensures products are sourced from designated countries—like BVA's manufacturing home in Taiwan—for government contracts. This guarantees quality, supports local economies, and meets strict procurement standards. Choosing TAA-compliant products means reliability and supporting ethical sourcing. Amidst a trend of competitors turning to outsourcing in China, We at BVA proudly distinguish ourselves by owning and operating our high-pressure hydraulics manufacturing plant in Taiwan since 1971. Taiwanese manufacturing is globally renowned for its top-tier quality, positioning the country among the premier TAA-compliant regions. By managing our facility directly, we streamline the sourcing of raw materials and enhance our ability to customize orders with unmatched flexibility

Brand Loyalty Versus Quality Control

It's easy to fall back on the old standby, but when you are given the option of greater control over your orders from raw material sourcing to drop shipping directly to a job site, the choice is clear. Every step of the way, BVA Hydraulics provides personal care in everything from testing their product up to 10,000 cycles and giving flexibility of customization on orders. Choosing a high-pressure hydraulics supplier doesn't have to be complicated.  BVA Hydraulics offers as much value as possible to ensure safety and reliability through all of its products. As a Factory Authorized Distributor and Warranty/Service Center, and with nearly 80 years of high-pressure, high-tonnage hydraulic experience, Buffalo Hydraulic is proud to partner with BVA Hydraulics in this way to serve your needs.

ASME B30.1

BVA Hydraulics hydraulic cylinders are designed, built, and tested to meet or exceed ASME B30.1 standards. Buffalo Hydraulic proudly serves as a Factory Authorized Stocking Distributor as well as a Factory Authorized Warranty/Service Center for all BVA Hydraulics products.

ISO 9001 Quality Assurance

BVA Hydraulics products are manufactured through an International Quality Assurance System, ISO 9001 which involves consistent observation of administration, management, manufacturing, and production control.  Under this system, the related operations are monitored on all aspects from the purchase order to the assembly line and through to shipping the order.

BVA Limited Lifetime Warranty

All BVA Hydraulics products are warranted to be free of defects in materials and workmanship.  Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product.  Contact BVA or Buffalo Hydraulic for the disposition of this warranty. This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by BVA and its authorized service centers.  All electric motors, gas engines, batteries,s and other parts or materials sold with or part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty.  BVA shall not be liable for consequential or incidental damage or loss.
,

BHBLC2000-SPL Buffalo Hydraulic Custom Tension-Weighing Cell

BHBLC2000-SPL Buffalo Hydraulic Custom, 2,000 LBS. Hydraulic Tension-Weighing Cell 0-2,000 lbs. capacity. Industrial hard-chrome cell body. SAE 660 Bronze, internal piston. NIST Certified, glycerin filled,...
© 2016 Buffalo Hydraulics. All Rights Reserved. Buffalo NY Web Design by Newbird
Terms and Conditions