SPX Power Team Custom Post Tensioning Systems
Inquire about SPX Power Team Custom Post Tensioning Systems
120 Tons Capacity Post Tensioning System
- PE241S SPX Power Team electric hydraulic pump.
- 115 VAC, 1 Ph., 60 Hz.
- 4-way, 3-position solenoid operated directional valve.
- Hand held push button pendant control.
- 2 1/2 Gallons reservoir volume.
- RH650 SPX Power Team Double acting hydraulic tensioning cylinders.
- Through hole, hollow plunger design.
- 9.50″ Collapsed height.
- 5.00″ Stroke/travel.
- 61.50 Tons capacity – each (123.10 total).
- 73 Lbs. each.
Related Products
Buffalo Hydraulic High Tonnage Jacking Systems
Buffalo Hydraulic BHCSY20X20-CHS-SPL Custom high tonnage hydraulic jacking manifold assembly. Independent and synchronous control to 20 hydraulic jacking cylinders. A custom designed hydraulic console that can...
Buffalo Hydraulic Custom Hydraulic Systems
Buffalo Hydraulic BHCSY5000-ACM-SPL 115 VAC, 1 Ph., 60 Hz. 5,000 psi Operating Pressure. Stainless Steel Accumulator. Petroleum Based Oil Inlet. Pressurized Water Outlet. Custom designed...
TK Simplex – Buffalo Hydraulic Electric Hydraulic Jacking Systems
Buffalo Hydraulic BHCSY24X50-6.00-SPL TK Simplex G5165 Electric Hydraulic Pump 115 VAC, 1 Ph., 60 Hz., 1.5 HP., Permanent Magnet Motor. High volume, 2-stage design. 1,100 cu.”...
Buffalo Hydraulic Electronic Load Cell Presses
BHHHP-10.00X10.00-SPL Hand operated custom, H-Frame hydraulic press. 10 Tons capacity. 10.00″ stroke/travel. 36.00″, 30.00″ and 24.00″ Lower bed positions. 8.00″ Side pass through access. Digital...
SPX Power Team Weldment Straightening
SPX Power Team R1506C 153.40 Tons Capacity. 10,000 psi Maximum Operating Pressure. 10.38″ Collapsed Height. 6.00″ Stroke. Single Acting – Load Return. 151 Lbs.
Buffalo Hydraulic Custom Hydraulic Jacking Cylinders
Buffalo Hydraulic BHDAJC-3.00X20.00-SPL Custom design hydraulic jacking cylinders. 3.00″ Diameter bore. 20.00″ Stroke/travel. Load holding over center valves for added safety & control.
Buffalo Hydraulic Custom Hydraulic Console
BHCSY-20X50-SPL 20-Port Manifold Console 20 Working ports. Custom built hydraulic manifold console. Independent control over all circuits. Synchronized control over all circuits. Easily customized to...
Buffalo Hydraulic Custom Hydraulic Powerunit
BHEP3000-5-SV-SPL 115 VAC, 1 Ph., 60 Hz. Solenoid operated directional valve. Flow control on ‘A’ and ‘B’ ports. Pressure reducing on ‘A’ and ‘B’ ports....
Enerpac Custom Hydraulic Solenoid Valves
VP-11 4-Way, 3-Position, 24 VDC, Solenoid operated directional valve. PRV-1 435-4,350 PSI, Pressure reducing valve. PSCK-8 1,450 – 5,000 psi 24 VDC/115 VAC Pressure switch. VFC-3...
Reviews
There are no reviews yet.